Eicon Networks S52 Uživatelská příručka stáhnout pdf (Strana 24)

Configuring Eiconcard Connections for Linux

page 22

9. Specify a value for the Static TEI parameter and press F1 for details on configuring the

D-channel to transfer X.25 packet data.

Note: For the NI-1 switch type, you must also specify the X.25 DTE address before you

can access the online help.

Configuration Procedure

The eiconcfg program stores most parameter settings in the Eiconcard configuration file. The

default name for this file is /opt/dialogic/c4l/ec.cfg.

The following steps outline the configuration process. References are made to several

configuration screens. For information on using configuration screens, see

Using the

Configuration Screens on page 20.

1. Create a backup copy of the ec.cfg configuration file in case you need to restore the original

version. Whenever you save the ec.cfg file, its previous version is saved to ec.bak.

Subsequent saves will overwrite the backup file.

2. Select the Eiconcard Services Protocol Configuration option from the main eiconcfg menu.

3. Type the name of the Eiconcard configuration file that you want to modify and press Enter.

To see a list of available configuration files, type *.cfg and press Enter. Use the cursor

keys to highlight the file that you wish to configure and press F4.

4. If you want to save the *.cfg settings to an ASCII text file, select an Eiconcard configuration

file in the Files box and press the F9 Print key. The ASCII text filename is *.prt, so if the

configuration file was ec.cfg, then the ASCII text file will be saved to ec.prt in the current

directory.

5. Press F4 Config to display the Hardware Configuration screen.

6. Select appropriate values in the Number of ports and Auto activate ports fields for each

Eiconcard in your system. Use the Spacebar to scroll through the available options in each

box, and use the cursor keys (), Tab key, or Enter key to move between boxes. If you are

configuring more than one Eiconcard, move to the appropriate column to change the values

for each Eiconcard. If an entry you select is invalid, then that entry will flash until you

change it (on X-terminals, the incorrect entry is simply highlighted).

7. Press F4 Config to display the Protocol Configuration screen for the Eiconcard selected.

Note: If there is an invalid entry anywhere on the current screen, you cannot continue to

the next configuration screen. You can use F10 Quit or the Esc key to cancel the entire

configuration operation.

8. Move the cursor to the Line Protocol Module box, and press the Spacebar until you see

the option you want. Press F4 Config to configure that option. When you are finished,

press F3 Prev to return to the main Protocol Configuration screen.

9. To change the Dialer Selection, move the cursor to the Dialer Selection box, and press the

Spacebar until you see the option you want. Press F4 Config to configure that option.

10. If you have additional Eiconcards to configure, press F6 NxtCrd. The message "Card n"

appears in the top right corner of the screen. Configure each Eiconcard as you did the first

by modifying the necessary Line-protocol module and Dialer-selection parameters.

11. Press F2 Save to save all parameter settings for all cards to the Eiconcard configuration

file you selected on the Eiconcard Connections for Linux Protocol Configuration screen.

12. Press F10 Quit to exit the configuration program.

13. Reload the Eiconcard(s) when prompted.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 90 91

Komentáře k této Příručce

Žádné komentáře

Eicon Networks S52 Uživatelská příručka Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Sítě Eicon Networks S52