Eicon Networks DIVA T/A ISDN Modem Uživatelská příručka stáhnout pdf (Strana 138)

Chapter Ten: Other Configuration Tools Command line interface (CLI)

138

About configuration context

The command line interface identifies the configuration context you are in by changing the prompt. When you

first activate the CLI interface you are in the General configuration context, which is identified by a plain

prompt (>). All other contexts are identified by a label added to the prompt.

About profiles

To make the configuration of the DIVA LAN ISDN Modem easier, the parameters that control its operation

have been combined into groups according to function. These groups are called profiles. When you want to

customize the operation of the DIVA LAN ISDN Modem, you use a CLI command to change the setting of a

parameter in one of its profiles. To do this, you must set the focus (also called the configuration context) of the

command line interface to be on the profile.

Connection profiles

Certain profiles define the characteristics of a connection, instead of just operational settings for the DIVA

LAN ISDN Modem. For example, the ISP profile defines a connection that enables the DIVA LAN ISDN

Modem to connected to an Internet service provider. When the profile is active, the features and functions

defined by the profile are active. In the case of the ISP profile, it means the DIVA LAN ISDN Modem will dial

and connect to the ISP whenever a computer attempts to browse the Internet.

Default profiles

The DIVA LAN ISDN Modem has following default profiles:

• ISP: This profile is created by the Internet Wizard. It defines the settings for a connection to the Internet.

• Corporate: This profile can be used to define the settings for the connection to a remote corporate site.

• LAN: This is an internal profile that is part of the default configuration of the DIVA LAN ISDN Modem.

It defines the settings for the LAN created by the Ethernet hub built into the DIVA LAN ISDN

Modem.You can change the settings of this profile, but you cannot deactivate it.

• Incoming: This is an internal profile that is part of the default configuration of the DIVA LAN ISDN

Modem. It defines how the DIVA LAN ISDN Modem handles incoming data calls.You can change the

settings of this profile. By default, support for incoming calls is disabled.

Command line reference

See Appendix C for a complete list of all CLI commands and their descriptions.

Loading firmware with the CLI

The DIVA LAN ISDN Modem firmware is the program that resides on the modem and controls all its

functions. Periodically, Eicon Technology may make new versions of the firmware available that improve the

performance of the modem or add additional features. To take advantage of these updates you must retrieve the

appropriate firmware module and load it on the DIVA LAN ISDN Modem.

Note

This section describes how to update the firmware using the CLI interface. The firmware can also be

easily upgraded using the web-based configuration interface and your web browser. See “Upgrading the DIVA

LAN ISDN Modem firmware” on page 48 for complete instructions.

Retrieving new firmware

Retrieve the new firmware from www.eicon.com/divalan/downld.htm.

To load the new firmware

Type the following command and press Enter.

> monitor

Type the following command and press Enter.

> at@load

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 190 191

Komentáře k této Příručce

Žádné komentáře

Eicon Networks DIVA T/A ISDN Modem Uživatelská příručka Strana 138

Komentáře k této Příručce

Související produkty a manuály pro Sítě Eicon Networks DIVA T/A ISDN Modem