Eicon Networks C20 Manuál s instrukcemi stáhnout pdf (Strana 36)

100

101

INTUITY Messaging Solutions Release 4

MAP/5P Maintenance

585-310-186

Issue 3

October 1997

Troubleshooting

Page 1-14Hard Disk Drive Access Troubleshooting

A pin on the Hard Disk

Drive 0 SCSI Bus cable

connector is bent or

broken.

Check the pins on Hard

Disk Drive 0 by doing the

following:

1. Remove the SCSI Bus

cable.

2. Check the pins on the

hard disk drive.

1. If a pin is bent,

straighten the pin.

If a pin is broken,

replace the hard disk

drive.

2. Reboot the system.

A pin on the P5 CPU circuit

card SCSI Bus cable

connector is bent or

broken.

Check the pins on the P5

120 MHz circuit card by

doing the following:

1. Remove the SCSI Bus

cable.

2. Check the pins on the

circuit card.

1. If a pin is bent,

straighten the pin.

If a pin is broken,

replace the circuit card.

2. Reboot the system.

Table 1-15. The System Displays No Boot Device Available Message with Ident-Strings

— Continued

Possible Cause Check/See Probable Fix

Continued on next page

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 409 410

Komentáře k této Příručce

Žádné komentáře

Eicon Networks C20 Manuál s instrukcemi Strana 36

Komentáře k této Příručce

Související produkty a manuály pro Sítě Eicon Networks C20