Eicon Networks S93 Instalační příručka stáhnout pdf (Strana 26)

WAN-Miniport driver 26

Configuring the WAN-Miniport driver

Remote Access Service handles communications through ports. The WAN-Miniport driver

assigns one ISDN B-channel or channelized T1 channel to each port. These ports can

be configured using the ‘Eicon WAN-Miniport Driver Setup’ dialog box.

Port List

In the ‘Port List’, you configure the ISDN or channelized T1 ports that are to be made

available to the RAS for communications. The ports are assigned automatically to the first

installed adapter.

If only one adapter is installed and MSNs do not need to be assigned, and if no special

parameters need to be configured, you can finish the configuration immediately by clicking

‘OK’. See Completing the installation of the WAN-Miniport driver

on page 36.

If multiple Diva Server adapters are installed, assign each adapter to every

communications port to which it needs access. Each port will use one B-channel or

channelized T1 channel on the assigned adapter. This means for example that one Diva

Server BRI-2M adapter can be used by two ports and one Diva Server 4BRI-8M adapter

can be used by eight ports.

When installing the WAN-Miniport driver, the ports are set up automatically according to

the type and number of currently installed adapters.

Configuring ports

The buttons ‘Add’ and ‘Delete’ can be used to add and delete ports as desired.

1. To change a port, select the port to be changed in the ‘Eicon WAN-Miniport Driver

Setup’ dialog box.

2. Click ‘Change’.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 129 130

Žádné komentáře

Eicon Networks S93 Instalační příručka Strana 26