Eicon Networks S93 Instalační příručka Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
Basic drivers 22
Specify if the adapter should generate internal ring tones when they are not provided
by the switch or PBX.
Specify if your adapter is operated in a hunt group or used as monitoring device.
For detailed explanations of the Advanced Settings, see the online help (Help or F1).
ISDN Protocol Settings
The ISDN Protocol Settings tab contains parameters for configuring the protocol
software. Specific information on the ISDN, Q-Sig, or RBS T1 protocol is requested here.
These parameters can usually remain at their standard values.
Note: With a Diva Server 4BRI or Voice 4BRI adapter, the ISDN Protocol Settings must
be specified individually for each of the four controllers (controller [1] to controller [4]).
Select [<controller number>] ISDN Protocol Settings for each of them.
Specifics of all Diva Server PRI and Diva Server Voice PRI adapters
Note: Not all of these parameters are available with the Q-Sig or RBS T1 protocol.
The following values must be set for primary rate adapters (PRI):
•‘TEI must be set to TEI 0.
•‘Connect Mode must be set to Permanent.
These values should be changed only on instruction of the ISDN provider.
Detailed explanations of the parameters can be found in the online help (Help or F1).
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 129 130

Komentáře k této Příručce

Žádné komentáře