Eicon Networks CX1 Instalační manuál stáhnout pdf (Strana 73)

G&R

RSYS NAME = GRDL, PF = ‘STID/ISO/SID3’, RSC = GRDL;

RSC NAME = GRDL, ADDR = DSA, SCID = 54:060, SVR=NCC1;

Or as follows for a DIWS Host Links system:

RSYS NAME = GRIL, PF = ‘STID/ISO/SID3’, RSC = GRIL;

RSC NAME = GRIL, ADDR = DSA, SCID = 54:060, SVR=NCC1,PRTC=SID;

Front-end configuration

If the connections go through a FEP, the FEP must have both the mainframe

and Host Links systems configured. If you have an operational network the host

is probably already configured (look for an SC directive with the DSA name of

the host).

A host links node can be defined as being of type -NAT ALL, -NAT ISO or

-NAT DSA and the network type can be LAN or X25. The following is an

example of a Host Links DSA node with LAN access. For more detailed

examples please refer to the section entitled Sample dsa.cfg on page 74:

SC GRDL RMT -ADDR 49:002 -NAT DSA -SR GRDL

SR GRDL ISO -TS GRDL

TS GRDL DIWS -NR GRDL -CLASS 4 -CRRE 15 -FEN 13 -TPDU 1024

NR GRDL LAN1 -PL GRDL

PL GRDL CSM1 -CB ETH1 -ETHAD 0000C0E9A8E6

Note that the GRDL DIWS in the example above means that the transport is

ISO-transport (rather than native DSA-transport), it doesn’t imply that the

session protocol is DIWS. The –NAT DSA directive sets the session protocol to

DSA.

GCOS6 configuration

Access to and from GCOS6 can go via a FEP or directly. In both cases, the

Host Links system must be defined in the network configuration

>sid>clm_net (Mod 400 v 3.1)

>wdd>startup>nw_config (Mod 400 v 4.0/HVS1.0 and later).

An example of a LAN connected Host Links system follows:

Gline Line Handlers and Configuration

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 132 133

Žádné komentáře

Eicon Networks CX1 Instalační manuál Strana 73