Eicon Networks 1530 Uživatelská příručka Strana 9
- Strana / 162
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Introduction 9
Specifications
Hardware Features
• VHSI (Very High Speed Interface) port, supports V.24 and V.35 interfaces
• Ethernet 10BaseT RJ45 port
• AUX port (DB9 V.24 serial interface) (currently unsupported)
• Power jack
• Hard Reset button
• Indicators lights
• Flash memory for convenient firmware upgrade (if available)
VHSI Port (Synchronous)
• 36-pin high-density D-type connector
• Auto-detection of the following interface types:
– V.24 (EIA RS232-C)
–V.35
• Speeds: 2400 bps to 2048 Kbps, depending on interface
• Protocol support: PPP, Frame Relay, X.25, Frame Relay
Indicator Lights
• Power status
• VHSI port status
• AUX port status (currently unused)
• Ethernet connector status (located on the connector itself)
• Ethernet activity (located on the connector itself)
Protocol support
• PPP:
– PPP compression (PPP CCP, PPP LZS-STAC, MPPC, Ascend LZS)
– Security: PAP, CHAP, MS-CHAP
•X.25:
– CCITT/ITU compliance: X.25, X.32, and X.121 (1984)
– Up to eight X.25 virtual circuits (includes PVCs and SVCs)
– PVC and SVC support with inactivity timeouts
– Compression (Eicon Stacker, CISCO, Bay Networks)
•Frame Relay:
– IP over Frame Relay (RFC 2427)
– Maximum of 8 DLCI
– Routing between DLCI
– Congestion management (FECN, BENC)
– Extended LSN
– Automatic LMI detection
– Congestion control (FECN & BECN)
– Frame Relay compression (FRF.9)
- Eicon 1530 WAN Router 1
- User’s Guide 1
- Contents 3
- Contents 4 4
- Introduction 6
- Package Contents 8
- Specifications 9
- Introduction 10 10
- System Requirements 12
- Step 1: Connect the Cables 13
- IP Address Recommendations 14
- LAN Setup Notes 14
- Restarting your computer 14
- What’s Next? 14
- Troubleshooting 16
- Adjusting Browser Settings 16
- Step 4: Modify VHSI Settings 17
- Step 5: Create a Profile 19
- Switching Between Profiles 20
- Deleting Profiles 20
- Step 7: Reset the Device 22
- Step 8: Test WAN Access 23
- Eicon 1530 24
- Technical Support 27
- Using your Eicon 1530 28
- Ports and Indicator Lights 29
- Using your Eicon 1530 30 30
- Procedure 31
- Using your Eicon 1530 32 32
- ‘Save’ button 33
- ‘Reset Device’ 33
- Getting Help 34
- Click on a 34
- A help window 34
- ‘Protocol’ 37
- ‘Protocol’ is 38
- Creating and Editing Profiles 39
- Security 41
- Security Features Summary 43
- System Password 44
- Automatic Log Out 45
- Security 46 46
- Security 47 47
- ‘Default NAT 48
- Server’ field 48
- Remote Management 49
- Security 50 50
- Authentication (PPP only) 51
- Manual Dialing 52
- How Filtering Works 53
- Important Notes on Filters 54
- Defining a New Filter 54
- Action Direction 55
- Source /Destination 55
- Location 55
- ProtocolAddress 55
- Security 57 57
- Default Filters 58
- Security 59 59
- First filter 60
- System Menu 62
- Connection Menu 63
- (when protocol is set to PPP) 64
- Minimum Connection Time 66
- Max Retries 66
- Retry Delay 66
- Restore Delay 66
- Range: 16-1007 67
- Connection Menu > IP Group 68
- RIP Version 69
- RIP Policy 69
- RIP Update 69
- Route Merging 69
- Domain Name 71
- Primary Address 71
- Secondary Address 71
- DNS Relay 72
- TFTP Server 72
- IP Spoofing 72
- IP Services 72
- Routes Menu (IP Tree) 73
- Filters Menu (IP Tree) 74
- NAT Mapping Menu (IP Tree) 75
- Time Client Menu (IP Tree) 76
- SNMP Menu (IP Tree) 77
- DHCP Menu (IP Tree) 78
- LAN Menu 80
- LAN Menu > RIP Group 81
- VHSI Port Menu 83
- Line Speed 84
- TX Idle Timeout 85
- X25 Version 87
- TOA/NPI Addressing 87
- Maximum Retry Count (N3) 87
- Sequential Assignment of VCs 88
- Maximum Frame Size N1 90
- Maximum Window Size K 90
- Checkpoint T1 93
- Ack Delay T2 93
- Idle Probe T3 93
- Protocol Menu (VHSI Tree) 94
- Enable Dynamic DLCI 96
- Global window size 96
- Window Size K 97
- Dialer Menu (VHSI Tree) 98
- Selecting an Interface Cable 99
- Interface Connection Part # 100
- The V.24 Interface 102
- The V.35 Interface 104
- Command Line Interface 106
- Overview 107
- General Commands 108
- Command Line Interface 109 109
- Time and Date Commands 110
- Log Commands 111
- Mail Trace Commands 112
- Profile Commands 113
- Context Commands 114
- DHCP Commands 115
- Command Line Interface 116 116
- Command Line Interface 117 117
- Direct Commands 118
- HAYES Commands 119
- Command Line Interface 120 120
- SHOW HAYES CONFIGURATION 121
- V25BIS Commands 122
- Command Line Interface 123 123
- DNS DOMAIN Commands 124
- ETHERNET Commands 125
- Frame Relay Commands 126
- SET FRELAY LMIN1 pollcycle 127
- SET FRELAY LMIP1 maxdlci 127
- Command Line Interface 128 128
- HDLC Commands 129
- SET HDLC N1 NumBytes 130
- SET HDLC N2 MaxRetryCount 130
- SET HDLC K MaxWindowSize 130
- Command Line Interface 131 131
- IP Route Commands 132
- UDP and TCP Commands 133
- IP Filter Commands 134
- Command Line Interface 135 135
- Command Line Interface 136 136
- NAT Commands 137
- IP Commands 138
- Command Line Interface 139 139
- Command Line Interface 140 140
- Command Line Interface 141 141
- SET PORT XT8 XT8Maximum 142
- SHOW PORT CONFIGURATION 142
- PPP Commands 143
- Command Line Interface 144 144
- SHOW PPP CONFIGURATION 145
- SHOW PPP STATISTICS 145
- SHOW PPP STATUS 145
- STOP PPP TRACE [port] 145
- RIP Commands 146
- ADD RIP REJECT ipaddr 147
- DELETE RIP REJECT ipaddr 147
- SHOW RIP REJECT 147
- SNMP Commands 148
- TFTP Commands 149
- Time Protocol Commands 150
- X.25 Commands 151
- Command Line Interface 152 152
- Command Line Interface 153 153
- Command Line Interface 154 154
- Command Line Interface 155 155
- STOP X25 TRACE 156
- SHOW X25 CONFIGURATION 156
- Declaration of Conformity 158
- Safety Notice 158
- Safety Status 159
- Limited Warranty 160
- Index 162 162
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 1.327 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce